주요 콘텐츠로 건너뛰기

Remington MB4040 Cover Assembly Replacement

알림: 귀하는 지금 열람하신 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 사용하는 모든 5 안내서에 영향을 미칩니다.

2 단계
Remington MB4040 Cover Assembly Replacement, Remove Back Cover Hardware: 0 단계, 이미지 2개 중 1개 Remington MB4040 Cover Assembly Replacement, Remove Back Cover Hardware: 0 단계, 이미지 2개 중 2개
Remove Back Cover Hardware
  • Place the device so the back of the product is facing up.

  • Remove the two 11.0 mm PH00 screws from the black plastic housing at the bottom of the device.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.