주요 콘텐츠로 건너뛰기

Sostituzione batteria iPod Mini

영어
이탈리아어
3 단계
iPod Mini Battery Replacement: 0 단계, 이미지 1개 중 1개
  • Carefully slide the iPod out of its casing by pushing on the logic board near the bottom edge of the click wheel.

  • As you slide the iPod out, small components may snag on the edge of the casing. Move the iPod side to side to clear these components.

  • Do not pull on the headphone jack board at the top of the iPod, as the connector to the logic board is fragile.

  • Be careful not to break the logic board connector off the iPod. The ribbon cable sits at the very top of the connector.

Sfila attentamente l'iPod dalla sua copertura spingendo la scheda madre dal bordo inferiore.

Mentre fai scorrere l'iPod verso l'esterno, piccoli componenti potrebbero impigliarsi sul bordo della custodia. Muovi l'iPod da un lato all'altro per liberare questi componenti.

Non tirare sulla scheda dell'entrata jack per le cuffie nella parte superiore dell'iPod, poiché il connettore alla scheda logica è fragile.

Stai attento a non rompere il connettore della scheda madre dall'iPod. Il cavo a nastro si trova proprio sopra il connettore.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.