물건을 수리하세요 커뮤니티 상점

iPod Nano 第二代电池更换

안내서로 돌아가기
영어
중국어
5 단계
iPod Nano 2nd Generation Battery Replacement: 0 단계, 이미지 1개 중 1개

  • Pull the battery wires through the logic board to free the battery. If the wires don't easily come free, make sure the wires are straight and all the solder has been removed.

  • Slide the three wires of the replacement battery through the holes in the logic board. Going from the edge of the iPod, the order of wires is black at the far right (close to the metal frame), red in the middle, and white to the far left.

将电池线虫电路板上拉出以便取下电池。如果电池线无法拆下，确保电池线已经弄直，并且所有的焊锡已经移除。

将替换电池的三根电池线穿过电路板的孔。从电路板的边缘开始看，线的顺序是黑色、红色、白色。

[* black] Pull the battery wires through the logic board to free the battery. If the wires don't easily come free, make sure the wires are straight and all the solder has been removed.
-[* black] Slide the three wires of the replacement battery through the holes in the logic board. Going from the edge of the iPod, the order of wires is black, red, white.
+[* black] Slide the three wires of the replacement battery through the holes in the logic board. Going from the edge of the iPod, the order of wires is black at the far right (close to the metal frame), red in the middle, and white to the far left.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.