주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

영어
프랑스어
2 단계
Once the rear glass is hot to the touch, apply a suction cup near the bottom edge  of the glass. Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap. Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.
  • Once the rear glass is hot to the touch, apply a suction cup near the bottom edge of the glass.

  • Lift on the suction cup to create a small gap underneath the rear glass, and insert an opening pick into the gap.

  • Optionally, once the pick is inserted, you can add a few drops of isopropyl alcohol into the gap to help weaken the adhesive in the following steps.

Une fois que la vitre arrière est chaude au toucher, posez une ventouse sur la partie inférieure de la vitre.

Soulevez la ventouse pour ouvrir un léger interstice sous la vitre arrière et insérez-y un médiator.

Facultatif : vous pouvez déposer quelques gouttes d'alcool isopropylique dans l'interstice pour aider à ramollir l'adhésif en vue des étapes suivantes.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.