주요 콘텐츠로 건너뛰기

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 25개에 영향을 미칩니다.

영어
프랑스어
3 단계
Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass. Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.
  • Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass.

  • Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

  • Re-heat the rear glass as needed to prevent the glue from cooling and hardening.

Faites glisser le médiator le long du côté inférieur du téléphone pour couper l'adhésif qui fixe la vitre arrière.

Il sera ensuite peut-être utile de laisser le médiator en place et d'en prendre un deuxième pour continuer à l'étape suivante. Cela empêchera la colle d'adhérer à nouveau.

Refaites chauffer la vitre arrière si nécessaire pour empêcher la colle de refroidir et durcir.

귀하의 기여는 오픈 소스 Creative Commons 인가 하에 허가되었습니다.