PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+)

안내서로 돌아가기

영어

한국어

이전 단계 다음 단계

5 단계 번역중

5 단계

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 0 단계, 이미지 3개 중 1개

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 0 단계, 이미지 3개 중 2개

PlayStation SCPH-5501 Motor Speed Adjustment (KSM-440ADM/AEM+), Adjust the motor trimpot: 0 단계, 이미지 3개 중 3개

Adjust the motor trimpot

EET owners: Your kit has this bit. No purchase needed.
Only adjust this enough to reliably read games and music CDs again. If the speed is too slow, the laser may physically "burn" your games, albeit very unlikely unless you adjust the laser trimpot on the mainboard.
Consider anything less then a 80-90% read rate a failure. These are hard to recover reliably.
Before starting, mark the original adjustment point and write down the factory setting as tested. It will be difficult to take it back to stock without this information.
Adjust the trimpot incrementally using a Phillips PH1 or other compatible bit. Do this until the laser is reading games more consistently.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.