주요 콘텐츠로 건너뛰기

Remplacement du boîtier de l'appareil photo Canon Powershot A610

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어
프랑스어
3 단계
Canon Powershot A610 Camera Housing Replacement: 0 단계, 이미지 1개 중 1개
  • Open the battery cover.

  • Remove the 5 mm screw that sits on the top of the battery slot.

  • Remove the three 6 mm screws that sit at the bottom of the battery slot.

  • Close the battery cover.

Ouvrez le couvercle de la batterie.

Retirez la vis de 5 mm qui se trouve sur le dessus du logement de la batterie.

Retirez les trois vis de 6 mm qui se trouvent au bas du logement de la batterie.

Fermez le couvercle de la batterie.

[* black] Open the battery cover.
-[* yellow] Remove the 5 mm screw that sits on the top of the battery slot.
-[* red] Remove the three 6 mm screws that sit at the bottom of the battery slot.
+[* red] Remove the 5 mm screw that sits on the top of the battery slot.
+[* orange] Remove the three 6 mm screws that sit at the bottom of the battery slot.
[* black] Close the battery cover.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.