Fujifilm X100T Lens Replacement

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

영어

한국어

28 단계 번역중

28 단계

Use a plastic opening tool and metal tweezers to lift up the ribbon located next to the center-right section of the green board.
Going any further into the camera is guaranteed to destroy the calibration of the sensor box in the camera. The plane of the sensor is calibrated to the plane of the lens elements or lens mount. Adjusting the tension on any sensor box mount screw makes the sensor and elements out of orthogonal alignment.
Remove the CMOS sensor aluminum heatsink by lifting it up with your hands. The sensor, PCB and heatsink are integrated into one unit.
With the sensor assembly removed, you should now be able to be able to see the silver lens cover beneath.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.