주요 콘텐츠로 건너뛰기

iPod Classic 배터리 교체

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 2개에 영향을 미칩니다.

4 단계
iPod Classic Battery Replacement: 0 단계, 이미지 1개 중 1개
  • At an angle, carefully insert a putty knife about 1/8 inch into the seam between the two opening tools.

  • There are thin metal rails running along the inside of the rear panel, so take great care when inserting the putty knife.

  • Once the putty knife has cleared the lip of the rear panel, pivot the putty knife so that it is vertical, and carefully (but firmly) wiggle it straight down into the gap between the opening tools.

비스듬한 각도를 유지하며 퍼티 나이프를 두 개의 여는 도구 사이의 이음세에 약 1/8인치(약 3mm) 깊이로 조심히 끼우세요.

여기에 번역 삽입

여기에 번역 삽입

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.