주요 콘텐츠로 건너뛰기

iPhone 6 前面板拆解

알림: 귀하는 선행 작업 안내서를 편집하고 계십니다. 변경된 사항들은 이 선행 작업 단계를 포함하는 안내서 23개에 영향을 미칩니다.

9 단계
iPhone 6 Front Panel Assembly Replacement, Removing the front panel assembly cable bracket screws: 0 단계, 이미지 1개 중 1개
Removing the front panel assembly cable bracket screws
  • Remove the following five Phillips screws securing the front panel assembly cable bracket:

  • Three 1.2 mm screws

  • One 1.7 mm screw

  • One 3.1 mm screw

  • Incorrect placement of these screws during reassembly will cause permanent damage to your iPhone's logic board.

卸下前面板排线固定板上的五颗十字型螺丝。

三颗1.2 mm螺丝

一颗1.7 mm螺丝

一颗3.1mm螺丝

安装过程中错误放置螺丝会造成iPhone 主板永久性损坏。

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.