Turtle Beach Elite 800 Transmitter Contact Pins Replacement

영어

한국어

4 단계 번역중

4 단계

Once the screws are removed, desolder the two wires from the board, and then remove it, and the charging pins with it.
Take extreme caution when dealing with a soldering iron. Refer to the desoldering guide for tips.
Note that for the purposes of this guide we simply clipped the wires connected to the board holding the charging pins.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.