iMac G5 20" Model A1076 Logic Board Replacement

영어

한국어

21 단계 번역중

21 단계

Lift the logic board out of the midplane. Careful, there is a light guide on the lower left that can tear if you are not careful. This guides the light to the power-on light at the front of the iMac.
When reinstalling your logic board, be sure to clean and apply a new layer of thermal paste to the U3 chip (highlighted in red) located on the underside of your logic board as well as its heat sink attached to the midplane.
We have a thermal paste guide that makes applying thermal paste a snap.

귀하의 기여는 오픈 소스 Createive Commons 라이선스 하에 허가되었습니다.