주요 콘텐츠로 건너뛰기
  1. Start by unlocking the right locking latch. Then, by simultaneously unlocking the left latch, lift the battery out of its socket.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

  2. Begin by spotting the dummy memory card. Then, remove it and put it on your workplan.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

  3. Locate the 15 screws that hold the bottom cover of the device in place. Unscrew them and place them on your work surface. Then, un-clip the bottom cover, starting with the side shown in the third picture.
    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

  4. Unscrew the screw  circled in red Pull out the M.2 SSD in the direction of the red arrows Pull out the M.2 SSD in the direction of the red arrows
    • Unscrew the screw circled in red

    • Pull out the M.2 SSD in the direction of the red arrows

결론

To reassemble your device, follow these instructions in reverse order.

다음 번역가들에게 특별히 감사 드립니다:

100%

이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›

Felice Suglia

회원 가입일: 2013년 06월 15일

14,724 평판

안내서 150개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 33