Prying and Opening Tool Assortment

  • Prying and Opening Tool Assortment
Prying and Opening Tool Assortment

US$9.99

US$9.99

제품 재입고 메시지를 보내드리겠습니다.

US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

상점 둘러보기

Ever fixed something? That’s Genius.

Share your repair story with #ImAGenius

We Are All Geniuses

Share your repair story with #ImAGenius

제품 정보

설명

설명

This tool assortment includes the most sought after Picks, Spudgers, Prying Tools, and more for electronics opening and component manipulation.

Includes:

수리 경험담

사용자 아바타
John Fitzgerald's Story Photo #1310284

내 문제

The back button on my phone was operating as if it was being pressed randomly.

나의 수리

I've replaced the camera before (thanks to Ifixit), so the disassembly went smoothly.

내 조언

Because it isn't specifically in the guide, there are a couple of small pieces (I think a speaker cover and the vibrator (for lack of a . . .

사용자 아바타

내 문제

The microphone had stopped working on my wife's first gen Pixel phone and warranty had lapsed about a month before.

나의 수리

Repair went pretty smoothly. Don't have a microwave so couldn't use the iOpener gel tube that came with repair kit (tried putting it in hot water but didn't really work) so used hair dr . . .

사용자 아바타

내 문제

My battery was at times barely lasting for half the day. It would randomly shut down even while displaying a reasonable amount of power remaining. Processor slowdown is real and painful.

나의 수리

Removing the adhesive on the battery was the most difficult part. The tabs ripped as soon as I tugged on them, . . .

사용자 아바타

내 문제

My phone still works great, but the battery was so old that it just wouldn't hold a decent charge anymore. The phone was not designed for the battery to be user-replaceable.

나의 수리

IFixIt assured me of how to go about it. I researched online and finally found a reputable replacement battery supplier, and I . . .

사용자 아바타

내 문제

Extend the life and keep these material out of landfill or contamination of other natons..

나의 수리

Perfect.

내 조언

Not too hard, go for it!

사용자 아바타

내 문제

My friend dropped my op1 and the red encoder hit the edge of the table. After the fall the red encoder only worked when holding pressure to the right and then spinning the encoder. Otherwise it would not register when turning it normally. I thought it just might be a mechanical issue but was not sur . . .

더 보기