iPhone 7 A1780 Adhesive Pads
Grab a toolkit for your iPhone 7 A1780 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
iPhone 7 Lightning Port Gasket
Replace an adhesive backed foam gasket for the lightning port compatible with the iPhone 7.
iPhone 7 Loudspeaker Gaskets
Replace the adhesive backed foam gasket for the loudspeaker opening compatible with the iPhone 7. Includes a set of 5 gaskets.
iPhone 7 Audio Control Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the audio control and power button cable in an iPhone 7. Set of 5 pads.
iPhone 7 Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 7. Includes a set of 5 pads.
iPhone 7 LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector compatible with the iPhone 7 model A1660, A1778, A1779, A1780. Includes a set of 5 pads.
iPhone 7 Rear Camera Foam Pads
Replace the adhesive backed foam pad between the rear-facing camera and the rear case compatible with the iPhone 7. Includes a set of 5 gaskets.
Externally, the Apple iPhone 7 is very similar to its predecessor. Other than a smoother look and a change in antenna band placement, not much has changed. However internally this phone is full of aggressive breaks from convention. Everything inside the new iPhone’s casing is a statement about the future of this phone. The home button is no longer a physical button, but rather full of pressure sensors and haptic vibration motors that simulate the feel of a button. The new A10 Fusion processor blends two high power cores that rival laptop performance along with two low power cores that combine with a much larger capacity battery to extend lifetime by up to two hours. This generation of iPhone has also seen the headphone jack removed, and in its place, new stereo speakers.
Model A1780 iPhone 7 is available exclusively from China Mobile and does not support CDMA networks. It is compatible with FDD-LTE bands 1, 2, 3, 4, 5, 7, 8, 12, 13, 17, 18, 19, 20, 25, 26, 27, 28, 29, 30 as well as TD-LTE bands 38, 39, 40, and 41.
The most commonly needed repair for the iPhone 7 are cracked screens and dead battery replacements. iFixit has the best iPhone 7 screens and iPhone 7 batteries on the market, along with a complete catalog of various other iPhone 7 parts for the less common repairs.
All iPhone 7 repairs will require a Pentalobe P2 screwdriver and Tripoint screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. New to iPhone repairs is the iPhone 7 display assembly adhesive, that will need to be purchased for any repair that removes the front screen. Since the iPhone 7 is water resistant, a new screen adhesive will be required in order to retain its resistance to water damage. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete your desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 7 repair guides for step-by-step instructions on how to make the fix.
The iPhone 7 earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: