iPod nano (1st Gen) Replacement Battery

  • iPod nano (1st Gen) Replacement Battery / Part Only
  • 360°
360
iPod nano (1st Gen) Replacement Battery

US$13.99

US$13.99

제품 재입고 메시지를 보내드리겠습니다.

제품 정보

설명

설명

Replace a dead or damaged battery with this part. This battery is compatible with a 1st generation iPod nano.

호환성

호환성

  • iPod nano (1st Gen)

명세서

명세서

Model #:
616-0224
Milliamp Hours:
400 mAh
Manufacturer:
Aftermarket

호환성

수리 경험담

사용자 아바타

내 문제

the old battery was down to 40 minutes run time on a full charge. time for a new battery.

나의 수리

opening the case was the hardest part. once that hurdle was overcome the rest was pretty straight forward. ipod is like new, plays for several hours now.

내 조언

i did not disconnect any of the ribbon cables between t . . .

사용자 아바타

내 문제

My 1G iPod Nano wasn't holding a charge. It would only last about an hour before zeroing out :(

나의 수리

The instructions were easy enough to understand. Some of the soldering was a little challenging, almost like I needed three or four hands at once....but voila! Done and Done! Looks exactly like it did . . .

사용자 아바타

내 문제

Battery not holding charge for long.

나의 수리

Excellent. My wife is happy with her "new" iPod.

내 조언

I placed a comment on the guide page as to the modifications to the process I made. Much simpler. Less skill required.

사용자 아바타

내 문제

The battery doesn't work perfectly and was old. Also the new iPod battery that ifixit sell have more mAh so I've decided to change it.

나의 수리

The repair was long and I was been careful. At the end the iPod worked perfectly and the battery give me more hours.

내 조언

I have an important advice about the ground str . . .

사용자 아바타

내 문제

First generation iPod nano was lasting less than two hours on the original battery.

나의 수리

Repair went smoothly. Took about three hours from start to finish.

내 조언

Take your time.

사용자 아바타

내 문제

I bought a used iPod nano on ebay and the battery didn't work (they didn't tell me about that part)so I decided to try and fix it.

나의 수리

I have used a soldering iron before so, I thought how hard can this be. Watched the video acouple of times. It was very straight forward. My iron might have gotten too . . .

사용자 아바타

내 문제

The battery in the Nano I found was dead. I guess that's why it was thrown out.

나의 수리

The repair was relatively easy and straightforward. Getting the case open is tricky, especially as the plastic tool provided doesn't hold up too well against the Nano's metal backing. But the instructions were easy to . . .

사용자 아바타

내 문제

After 5 years of operation my Daughters little iPod nano (G1) gave up the ghost due to a faulty battery. The battery actually expanded and "popped" the case open. My daughter was distraught that she could not listen to here "Phineas & Ferb".

나의 수리

Repair was easy. The case was already open due to the bloat . . .

더 보기