메인 콘텐츠로 스킵하기

Released on June 23, 1996, Model NUS-001, 64-bit gaming console

64 질문 전체 보기

Why won't the TV recognize my N64?

Hi! I was feeling pretty nostalgic recently and got an N64. It worked for a few plays, but I've been trouble recently. The N64 turns on just fine, but the TV won't recognize it---it gives me a "no input" error.

I thought it might just be AV cables going bad (they were pretty old) so I replaced those, but no dice.

I did just get an expansion pack to play Majora's Mask, but it worked after that for about one play. Since then it hasn't.

I've tried different ports to make sure I have the AV cables in the proper place, and nothing appears to help. I've plugged it into TVs not connected to satellite, I've disconnected other gaming devices, I've tried everything I can think of. Does anyone have any suggestions?

i've tried it on multiple television sets, by the way, in different households.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글:

Probably logic board failure. I would recommend getting a new one.

의 답변

의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

1개의 답변

선택된 해법

Rachel, hope it has worked on the newer TV's before. Anyhow, I would suggest that you clean the cartridge slot first, follow this guide. After that, it is time to open up your console, use this guide, and check for any obvious signs of burned or loose connections. Check for broken solder contacts near the power switch and near where the power pack plugs in. If you are handy with a multimeter, I think I even have some schematics for this console. Hope that helps, good luck.

Nintendo 64 이미지

안내서

How to clean the Nintendo 64 cartridge slot

난이도:

아주 쉬움

5 minutes

Nintendo 64 Motherboard 이미지

안내서

Nintendo 64 Motherboard Replacement

난이도:

쉬움

15 - 20 minutes

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Rachel 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 15

지난 30일: 72

전체 시간: 5,653