옵션

During LCD repair this fell out... affect mic quality?

While I was replacing my LCD/digitizer/glass assembly this showed up on my work bench...

Picture:

http://i53.photobucket.com/albums/g80/dr...

(it looks gold because of my light source, but it is silver)

It looks like some kind of grounding mesh (similar to what I have seen in the old 4th gen ipod that had the metal back).

My voice quality seems to have suffered (others not hearing me well) after my repair and I'm wondering if this has anything to do with it. I sound fine while on speakerphone and while using a headset w/mic.

I have searched for this everywhere but have found nothing on it. I hope someone knows what this is and that this is the cause of my microphone problem

Thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

게시일: 2013년 5월 20일

옵션

drlewis506, you are correct in your comparison to your old iPod. That is a grounding pad. It provides ground between the case and the logic board, most of those pads are non-critical. Unless it grounds part of your mic circuitry, it should not affect the voice quality. Hope this helps, good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks oldturkey03! I'll be sure to replace this and see if it clears up my issue. The only other problem I had during my repair was breaking one the EMI fingers on the speaker enclosure/antenna assembly (the one closest to the logic board)... any idea if this would have any effect on the mic?

Thanks again

drlewis506 의 2013년 5월 20일

댓글 달기

iPhone 4S

During LCD repair this fell out... affect mic quality?

답변 1개

귀하의 답변을 추가하세요