주요 콘텐츠로 건너뛰기

모델 A1286. 2011년 2월 출시 / 2.0, 2.2, 또는 2.3 GHz 쿼드-코어 Intel Core i7 프로세서

586 질문 전체 보기

Battery shows an x is not charging

My battery shows an x and is not charging. The macbook works only with the adapter but when I remove it the mac shuts down. I bought the mac in 2010 and it has only 134 cycles. The battery is not removable. Can someone provide a solution ?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

Apple MacBook Pro "Core i5" 2.3 13" Early 2011 Specs

Identifiers: Early 2011 13" - MC700LL/A - MacBookPro8,1 - A1278 - 2419*

댓글 달기

답변 2개

선택된 답변

Please give us the last three figures of your serial number.

Next, is the X Red or Black. Next download and run Coconut Battery and let us know your results. http://www.coconut-flavour.com

UPDATE

Try resetting the SMC

Shut down the computer.

Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.

On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.

Release all the keys and the power button at the same time.

Press the power button to turn on the computer.

Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

The last 3 figures of my serial number are H2G. The X is black and I had installed coconut battery a month ago and currently there are no readings it simply says N/A. The battery information in the system report (About this Mac) is simply not there anymore.

댓글 달기

I'm having the same issue - plugged in a new battery, and I'm only getting a black x. I've tried resetting the SMC several times, but I don't think it's working. It's most obvious that something is happening when I do the key combo while booted - the system immediately dies. But regardless whether it's booted or not, the magsafe adapter light doesn't change or flicker - is just a constant green. I just bought this adapter new a few days ago straight from apple.

The reason I don't think the SMC reset is working is because when I plug in the adapter with the lid closed, the computer boots (sound and all) then if I let it go to sleep and open the lid, I can't get it awake again without a hard reboot. This is the type of "weird" behavior that the help pages indicate the need for an SMC reset.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Saad Khan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 6,260