주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

iPhone 5 wont boot after connecting front facing camera cables.

So I had to take my phone apart so that I could replace the broken screen with a new one. After doing so, I tested to see if the screen worked just by connecting the 2 flex cables on the new screen/digitizer and the phone booted up just fine. After connecting the front facing camera and the ear speaker, the phone was not able to boot and a message of white text came up on a black screen. Ive searched all over google for this problem but I cant find anything, does anyone seem to know what the problem is here?

Thank you in advance.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 1개

Still no luck. Should I order a new front speaker or ear speaker?

댓글 달기

답변 3개

가장 유용한 답변

The front facing camera cables are not properly installed, something gets shorted and factory NAND test is triggered. reinstall the cables on the screen assembly and try again

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Ive tried it many times already, can it be something wrong with the Speaker that it wont boot?

Speakers do not connect to any buses, it has to be the sensor.

댓글 달기

This happened to me too. Any fixes yet?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Ok. I figured It out. .. it means your front camera is bad. You just need a new one.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 477