Atari 2600 RCA Video Input
How do you change the video on the Atari 2600 to input to the TV using RCA instead of the one line with a antenna input adapter. Similar to PlayStation or NES
좋은 질문입니까?
점수
-1
152255
답변 1개
평판: 837k
1.3k
942
2.4k
rachelsmith9473, the Atari 2600 was originally designed to output an RF modulated signal. That means the audio and video signals were combined into one signal. There are several Vid Mods out for the Atari, to convert to either composite or even S-Video. My favorite is the one from here. You can purchase it complete, as a kit or see the attached images for a DIY solution. Also, check this site for another mod. Hope this helps, good luck.
Part Mouser Part Number Quantity
100uF Cap 140-L16V100-RC 1
.1uF Cap 581-5ZH104ZEDAA 2
10uF Cap 810-FK20X7R1C106M 1
1uF Cap 140-L50V1.0-RC 2
1N914 512-1N914BTR 1
2N3904 512-2N3904BU 1
1.5K 660-CFS1/4CT52R152J 1
10 660-CFS1/4CT52R100J 1
9.1K 660-CFS1/4CT52R912J 1
36K 660-CFS1/4CT52R363J 1
18K 660-CFS1/4CT52R183J 1
75 660-CFS1/4CT52R750J 10
2K 660-CFS1/4CT52R202J 1
1.6K 660-CFS1/4CT52R162J 1
680 660-CFS1/4CT52R681J 1
1K 660-CFS1/4C102J 1
1.8K 660-CFS1/4CT52R182J 2
CD74HC4050E 595-CD74HC4050E 1
FMS6400 512-FMS6400CSX 1
S-Video Jack 161-2104 1
RCA Jack Y 502-BPJF04X 1 502-BPJF04AUX
RCA Jack W 502-BPJF03X 1 502-BPJF03AUX
RCA Jack R 502-BPJF02X 1 502-BPJF02AUX
Wire 523-111-2213-010FT 1
from here.
이 답변이 도움이 되었나요?
점수
0
