I was removing the logic board and broke the microphone male connector. The picture is here
. The connector is where the spudger is.
Here is another pic.
I know it is a mic and not really needed, but would anybody know where I can buy that little connector?
좋은 질문 입니까?
평판: 116.3k
66
68
359
A work around would be to purchase a USB microphone (or a USB voice quality headset & mic).
Soldering logic board components is not a DIY project… it's not like soldering a light cord. You need special tools, solder and lots & lots of practice.
I suggest you check with a local computer/small electronics repair shop. Any shop that would undertake such a job should have a source for such parts, or could solder the connector permanently to the logic board.
If this answer is acceptable please remember to return and mark it.
해당 답변은 도움이 되었습니까?
I have access to professional techs that can solder for me - just need to find the part & a place I can order. I work in the electronics industry.
Are there any places online or shops that I could contact? I'll need to find a place that gets into the details - a "genius" is going to tell me to replace the logic board, so I do not know a local place.
I don't have any sources… if you can't find a connector soldering it permanently would work.
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 228
