주요 콘텐츠로 건너뛰기

MacBook Pro 15" display 모델

6992 질문 전체 보기

Keyboard non responsive after removal of ribbon cable

Hello, I recently removed my logic board to clean things up. It's not my first time at all, but when I removed the ribbon cable for the keyboard and then tried to reinstall it, it only goes about 1/8th of an inch in and will not lock into position. Now I have no keyboard... Anyone experience this or know what be going on? Really hope I don't have to replace the board...

I did lift the locking lever thing. I don't know it's technical name but it won't lock the cable in position even when it's in its locked position.

Pictures: http://img.tapatalk.com/d/13/12/20/ubuva...

Block Image

http://img.tapatalk.com/d/13/12/20/y5udu...

Block Image

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

2개의 답변

선택된 해법

Sounds to me like you broke the connector, specifically the cam lock. You may have pulled the ribbon out without unlocking, that could have damaged the end of the ribbon cable… perhaps leaving some insulation stripped off inside the connector. You might be able to puff the insulation out with a blast of air - otherwise a professional replacement of the connector (logic board soldering requires special tools, solder, and lots & lots of practice) OR, logic board replacement.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

The cable may have been bent somehow, so you should check that. You may have also broken the connector, so you would have to replace it.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Chris 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 93