Swap screens or cases?

I wonder which option is better if either one is at all possible: To put the logic board and possibly all the ports (USB etc.) of an early 2008 Penryn 2.1 GHz, S/N: W8834FJD0P0, in the case of a mid 2007 Core 2 Duo 2.16 GHz MacBook, S/N: 4H648NLRWGK or to put the the display assembly of the mid 2007 in the early Penryn?

If I would put the display assembly in Penryn, could I just remove the Airport card from the mid 2007 and put it in Penryn? Otherwise Airport won't work since there are 3 cables connected to the Airport card on the mid 2007 MacBook and only 2 in Penryn.

Best regards,


답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0



Apple MacBook "Core 2 Duo" 2.1 13" (White-08) Specs

Identifiers: Early 2008 - MB402LL/A* - MacBook4,1 - A1181 - 2242

wgk Apple MacBook "Core 2 Duo" 1.83 13" Specs

Identifiers: Late 2006 - MA699LL/A - MacBook2,1 - A1181 - 2121

의 답변

The first one (Early 2008 etc.) is right but the second one is not. It's this is one: Apple MacBook "Core 2 Duo" 2.16 13" (White) Specs, Identifiers: Mid-2007 - MB062LL/A - MacBook2,1 - A1181 - 2139. Or did I totally miss something out? (Just recently I asked another question about an SSD from MB Air and in that question I mentioned the "Late 2006" MB but it's not related to this question/post).

Does opo mean the S/N of the Airport card? I'm still eagerly waiting for an answer to my original questions :)


의 답변

의견 추가하세요

1개의 답변

선택된 해법

You should put the display itself in the 2008, so that it doesn't have any compatibility issues. However, if it's a part of the display assembly that isn't the display, then put the airport card from the 2007 in the 2008, and take the whole display assembly.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Daniel Lundberg 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 73