기기를 수리하세요 커뮤니티 상점

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

152 질문 전체 보기

옵션

Touch Screen (digitizer) tempramental after new one fitted?

Firstly I have now successfully removed and fitted over 50 new digitizers on Ipad's including 10 iPad mini's.

The one in question was bought to me after a failed DIY fix. I have attempted to fit 3 different digitizers that work perfectly in other machines but without success.

The problem is very temperamental, sometimes the touch screen will work perfectly and at others not. I have attempted to apply pressure at different parts of the PCB without change, the ribbon clips and connectors look ok under magnification and I have restored the devise back to factory setting and updated. Nothing makes any difference.

Be grateful for any help and advice - many thanks Dan

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 1개

Hope it's not bad manners bumping my question?

의

댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Assume the black fpc connector latch is faulty. Wedge some thin stiff plastic on top of flex and leave latch up. If this fixes it, you need a new fpc. If not, come back and we can look for missing continuity on the board

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

Hi Dan, try putting pressure on both the the digitiser connectors, and see if it works, keep putting pressure while your testing the digtizer

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

Thank you for the advise Waseem,

I will give this another go but pretty sure I have already tried this. My first suspicions were that the connectors had been damaged.

I'll get back to you once I have investigated further - thanks again Dan

의

댓글 달기

옵션

@ jessabethany - thank you for that I will give it a go and get back to you. :)

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Dan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 445