The right dome of my headset doesn't work properly. It is dependent on angle of the cable. It does work if I hold the cable (seen in the picture with my hand and an computer screen) at an angle. I was wondering how/if it is possible to fix this. Edit: Currtently using the following
low tech solution but might need a better one in the future.
좋은 질문 입니까?
평판: 784.3k
1.1k
894
2.3k
SelonNerias, sounds like either a broken wire or bad solder connection on the inside of the dome. I would disassemble the dome and check the contacts on the driver. Resolder those to see what happens.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 2
30일 전: 9
전체 시간: 494
