주요 콘텐츠로 건너뛰기

7.9 inch display / Model A1432 / Available in black or white / Announced October 23rd, 2012 / 16, 32, or 64 GB capacity

220 질문 전체 보기

Screen glitches and pixely after replaced digitizer

I recently replaced the digitizer on a friends ipad mini and when i rebooted it the screen is very pixely and is jumping around and is glitchy. Ive tried reconnecting everything and i dont think its the digitizer causeing the problem because i disconnected it and it still was acting this way.

these are some pictures they are not blurry the screen looks like that

http://imgur.com/a/vPRaQ

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1

댓글 1개:

a picture go's a long way. update with a picture.

댓글 달기

답변 1개

That is an LCD problem.

Disconnect battery first, then take off the LCD and reseat the connector. Look closely for any accidental damage to the motherboard. If you don't see any (most likely case), then order a new LCD to solve.

It is very very common to damage the LCD in the iPad mini on removal---especially if it is a 4G model with tape at both top and bottom.

jessa

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

ropesgames 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 322