옵션

Stuck tri-point trackpad screw

Step 10 in the Trackpad Replacement Guide says "Remove the six 1.4 mm Y0 Tri-point screws securing the trackpad to the upper case." Unfortunately, one of these tiny screws seems to be jammed in its hole in the trackpad, and the three-lobe cut in the top (where the Tri-point Y0 Screwdriver fits) is stripped out, so the screwdriver can't get enough purchase to turn the screw.

Anybody have any suggestions for how to get this screw out?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

게시일: 2014년 11월 23일

옵션

Here's a lot of possibilities.

If this answer is acceptable please remember to return and mark it accepted.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 1개:

Thanks for the tips. Unfortunately, I don't have the tools, and anyway these screws are so tiny (1.4mm "long") I don't think any of these tactics would work. I'll see what I can do.

HandyMac 의 2014년 11월 25일

댓글 달기

MacBook Unibody Model A1278

Stuck tri-point trackpad screw

답변 1개

귀하의 답변을 추가하세요