New hard drive not recognized by disk utilities

Some history on why you replaced the old drive would help us help you. Also, what drive are you trying to use and where did it come from? Is it a known "good drive"?

mayer 의 2010년 6월 25일

Hello

I want to have a bigger hard drive, mine that came with the MacBook has 100 GB capacity.

So I bought a western digital scorpio blue 500 GB SATA HD 5400 rpm.

I bought it at a cp reseller nearby.

Thanks for helping

Anatol

Anatol 의 2010년 6월 25일

댓글 달기

답변 1개

선택된 답변

originalmachead @originalmachead

평판: 116.3k

66

68

359

게시일: 2010년 6월 25일

옵션

the drive is not connecting. The rubber bushing or dampers on the sides can bunch up as the drive is slid toward the connector. Can you hear or feel the drive spin up?

A sure fire way to tell if the drive is faulty would be to remove the top case and look. Or to remove the side pins from the drive and check that you can slide it onto the connector. If it mounts or shows up in Disk Utility after that you know where the problem lies (dampers).

If this answer is acceptable please return and mark it

Good Luck,

N.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 3개:

I think that is the problem that I am not sure if the drive spins up. I will check tomorrow with my

pc reseller.

Thank you for your answer at the moment.

Anatol

Anatol 의 2010년 6월 25일

I am having a similar issue. My old hard drive crashed in my Late 2007 Macbook according to apple specialists at the apple store, so I bought a new 1TB 2.5" hard drive and replaced it myself. I inserted my Snow Leapard install disk, and I start to go through the steps, but when it asks "where you want to install Mac OS X" the box below is empty. I've tried taking the HD out and putting it in again, being cautious of the rubber, and its seeming to fit well. I even heard a small beep once when I unplugged it. Why isn't my new HD showing up for me to install my software?

Help please?!

kayley 의 2014년 9월 5일

Kayley - For future reference you posted a Question in the place where only Comments belong. Please create your own original Question. Before attempting to install the OS did you neglect to use DiskTools to FORMAT the HD in Mac GUID for Intel machines?

originalmachead 의 2014년 9월 5일

댓글 달기

Some history on why you replaced the old drive would help us help you. Also, what drive are you trying to use and where did it come from? Is it a known "good drive"? — mayer
Hello

I want to have a bigger hard drive, mine that came with the MacBook has 100 GB capacity.

So I bought a western digital scorpio blue 500 GB SATA HD 5400 rpm.

I bought it at a cp reseller nearby.

Thanks for helping

Anatol — Anatol
I think that is the problem that I am not sure if the drive spins up. I will check tomorrow with my

pc reseller.

Thank you for your answer at the moment.

Anatol — Anatol
I am having a similar issue. My old hard drive crashed in my Late 2007 Macbook according to apple specialists at the apple store, so I bought a new 1TB 2.5" hard drive and replaced it myself. I inserted my Snow Leapard install disk, and I start to go through the steps, but when it asks "where you want to install Mac OS X" the box below is empty. I've tried taking the HD out and putting it in again, being cautious of the rubber, and its seeming to fit well. I even heard a small beep once when I unplugged it. Why isn't my new HD showing up for me to install my software?

Help please?! — kayley
Kayley - For future reference you posted a Question in the place where only Comments belong. Please create your own original Question. Before attempting to install the OS did you neglect to use DiskTools to FORMAT the HD in Mac GUID for Intel machines? — originalmachead

MacBook Core Duo

New hard drive not recognized by disk utilities

Update

답변 1개

It's possible

귀하의 답변을 추가하세요