Hi, I have a nice and new Patagonia rain jacket, 2 weeks ago I slipped when coming down a hill and made a 1/2 inch L-shaped tear in the sleeve. I could just stick on duct tape, but have you any other tips?
좋은 질문 입니까?
평판: 89k
161
176
570
Is your jacket a rain jacket or a baffled jacket (like a down jacket or Nano Puff)? The repair process for each is slightly different. In either case, you will need to patch over the whole tear to prevent water from seeping in. You may even need to sew the old material down underneath the patch.
We have a guide on how to patch a baffled jacket here: How To Repair A Baffle On A Patagonia Down Jacket
For a regular rain jacket, you can apply a watch of waterproof fabric over the top and sew it down along the edge. You will want to fold the edges of the patch under so that they are caught in the stitching. You can follow the steps in this guide for a basic patching procedure: Repairing Patagonia Jacket with a Shaped Baffle
If you need additional help you can contact Patagonia customer service.
Good luck and let us know how it goes!
안내서
난이도:
어려움
—
40 minutes - 1 hour
안내서
난이도:
운영
—
30 minutes
해당 답변은 도움이 되었습니까?
평판: 451.8k
11
367
1.4k
Hi @selma0613
The image, was taken from the Patagonia Australia website. http://www.patagonia.com.au/worn-wear (scroll about 1/2 way down the page in the link to find it).
(Click on this image to enlarge it for better viewing).
It says that they will fix your problem for FREE. Hopefully this applies to the Patagonia branch where you are as well, if not in Australia.
해당 답변은 도움이 되었습니까?
I have a rain jacket that has a tore in the front of the jacket. The inside of the jacket is made to keep you warm. Is there is a patch that would stick or scretch with the material. I will decorate the patch since it's in the front of the jacket.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 12
30일 전: 35
전체 시간: 6,973
