주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

Screen Does not fit after replacing the entire display assembly.

So I fixed a friends iPhone 5 Display assembly after it was dropped and cracked. The repair went without a hitch. However, the top of the phone (the top as in where the front facing camera is) doesn't go in all the way anymore. Anyone have any ideas what it could be? Ive taken the screen completely out and done it over couple times and still the same result... Anyone who can answer this I will mark that you gave me the answer!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Make sure you are putting the screen on like this and the clips are going under the frame needs to be fitted from an angle

Block Image

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

So basically slide it in underneath?

댓글 달기

Your frame is probably damaged so that the clip on the top of the frame are now insufficient.

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

You might be right

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 61