기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

옵션

Backlight issue possibly motherboard

Hi guys

OK i now its not the screens as i have tried several good screens which all work great on other iPhone 5's which i have since fitted onto customers iPhones no one has come back with any issues.

So it has to be something else i have reset the iPhone back to factory settings & had the battery off for a few weeks to hopefully reset it but no joy there.

This was my personal iPhone & its as if it knew it was being replaced as this happened a couple of days before my upgrade which was back in November last year.

I have never had to do any work on this iPhone so its always had the original screen on it original battery ETC in fact i have never had to open it up until this happened i thought it was going to be quite a simple backlight repair.

Any ideas or suggestions greatly appreciated.

Thank you.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Backlight fuse on board possibly

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

옵션

I have seen this before on an iPhone5 that sustained liquid damage. We replaced the backlight IC and it was good as gold again.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

Hi Con this would be something i would like to be able to do.

Since i have had my carpal tunnel operations my soldering skills has gone out of the window.

I don't think this would be something done with a soldering iron i would be keen to know or even learn how to perform these types of repairs.

의

댓글 달기

옵션

Kenny--what is the history of this phone and problem?

Usually a blown backlight filter is to blame, or LCD connector damage---but this only happens at a screen replacement, not just on its own.

jessa

해당 답변은 도움이 되었습니까?

예 아니요
점수 0

댓글 1개:

Hi Jessa this was my personal phone that i bought from Apple direct just before i left the company to start up my own repair centre in Feb 2013.

It was always kept in a case with a Zagg screen protector & i had never had to do any work on it at all this issue was the first hardware issue the iPhone has ever had (apart from a few software issues that resetting didn't resolve).

This issue happened 3 months before i was due my upgrade but my phone provider allowed me to upgrade early.

I'm hoping to get it back into a working condition if i'm able to do the repair myself i would. I would be keen to learn how to perform motherboard level repairs. I know this is not a repair that can be done by hand soldering & if it were i would not be able to perform it as i have had carpal tunnel operations on both hands & I'm now very shaky so hand soldering is a no no these days

의

댓글 달기

귀하의 답변을 추가하세요

Kenny Leonard 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 176