주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

iPhone 5 keeps rebooting after water damage

Hope you can help me out, my iPhone fell into the water. After this my iPhone will only boot up when the charger is plugged in. Then it boots up every 3 seconds. So I openend up my phone and I saw the following was missing:

Block Image

Is this the problem?

Or should I replace my U2 ic?

Hope anyone can help me out!

Thanks in advance!

Thomas.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Thomas, yes that is a part that could be the cause for it. It is reference designator FL10 which is a 120OHM 210MA fixed inductor in a 01005 package. Go with that first. It's a lot easier to replace that one than U2. Make sure that you clean your board properly with isopropyl alcohol etc. while you are replacing the inductor.

해당 답변은 도움이 되었습니까?

점수 0

댓글 2개:

Really, you are so great! Thanks! One last question, think you hear this one a lot, where can i find and order the 120 OHM 210MA fixed inductor?

Again thank you very much!

Of all places, you can get it from Amazon Of course, my choice would be this one.

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 459