주요 콘텐츠로 건너뛰기

How can I replace the ear pads of an MDR-10RBT headphone?

The pads go in through the sides and I can't pull them out for replacement. There's no visible way of opening the housing either. Does anyone know how to replace the ear pads on this headphone?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 3개

선택된 답변

Turns out it requires squeezing from the sides to unhook the clips.

Here's the clip:

Block Image

There are 5:

Block Image

They are hooked to the body:

Block Image

Be careful not to break the plastic clips. These protrude from a plastic ring that's actually not part of the pad, but glued to it. The replacement pad sold does not come with this ring. You need to detach it from the old pad and glue it to the new one.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Sebouh, looks like it would require a slight twist. There are tabs in the back of the back of the ear pads that need to line up.

Block Image

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

I tried twisting and pulling, but it's as if the tabbed plastic is held by something within the housing. I can't twist without ripping the leather apart, and that's only stretching the leather, not moving the plastic at all.

댓글 달기

There is detailed information in the service manual (disassembly)

Service Manual

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Sebouh 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 4

전체 시간: 3,654