기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

옵션

iPhone 5 Not charging, changed battery and charging port still not.

Hi,

i've tried to change battery as my previous onces gone 0% was not turning on... (not charging) then i changed and new battery had 62% but still didn't charging... so now i've tried to change port but still same problem not charging!

i've noticed that when battery is dead (0%) and i plug cable, it continusly show icons which tell to charge, when i unplug no icons till i press power button... what could be the problem? u2 chip?

Sorry for bad english ( i'm Italian)

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 1개

can somebody helP me?

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Yes, this sounds like a defective U2 chip. Try to find someone locally to do this for you. If you can't find anyone, feel free to contact us (we're in the USA) and we can do this for you.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

madaraus you may have problems with the USB IC protector or the charging IC. Take a look at those components. To repair them you would have to reflow the BGA IC or even replace it with a reball. If you have not done that, you may want to leave it for a professional to do.

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 5개:

@oldturkey03 , have you had much successes reflowing this? My understanding is that you pretty much need to replace it as it is usually caused by a damaged U2 chip instead of just cracked solder joints. Let me know what you think.

의

Done a few and had mixed results. Replacement is a pain. It is almost easier to just apply jumpers instead. I do not recommend this for a first time DIY attempt

의

Apply jumpers in lieu of reflowing? I don't follow

의

The u2 has 36 pins, which 2 do you jumper across?

의

sorry, that is jumpers across Q2

의

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,660