주요 콘텐츠로 건너뛰기

Apple 고유 커넥터를 포함한 Harman Kardon 제작 스피커. 모델 번호 M8756으로 식별

2 질문 전체 보기

How to take apart the Amp of the Apple Pro Speaker?

Hey, my G4 Cube speaker recently has the cord of amp loosen. I want to open tge amp case to fix it. But I couldn't find any source in the internet. Could you please assist?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2
댓글 6개

Thank you for your reply. My Apple Pro Speaker is the one come with the G4 cube, which has a translucent shell for the amp. I woul like to know the way to open the shell without damaging it.

Thanks anyway:)

Is there a identification number on it? Like an A1122 number?

I don't know. But the picture in this link shows the speaker:

http://blog.pardner.com/2012/08/using-th...

Thank you. But the auther didn't tell how it was open.

댓글 1개 더보기

댓글 달기

답변 2개

선택된 답변

See if this guide will help you: Using Apple Pro Speakers with a class-d amplifier

UPDATE

See if this guide is what you need: Repairing Apple Pro Speakers Loose Cone

Apple Pro Speakers M8756 이미지

안내서

Using Apple Pro Speakers with a class-d amplifier

난이도:

어려움

20 minutes

Apple Pro Speakers M8756 이미지

안내서

Repairing Apple Pro Speakers Loose Cone

난이도:

운영

30 - 45 minutes

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기
가장 유용한 답변

for anyone else:

I just recently popped my Cube amp open as well. It seems like it's just glued shut, but it's not a chemical glue so you should be able to pop it open with minimal difficulty. I used a piece of sheet metal about the thickness of a razor blade, so a razor blade itself would probably work to open it up.

Block Image

Just be careful because the bottom half has a groove that the top half actually fits into; you can't just slice a razor straight down because it will hit the bump.

Block Image

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Hey Josh what was your experience getting the inner shell open? I'm at that point and am concerned about damaging the plastic in the process. Any pointers? Thanks!

Just kidding. I managed to get it open easily by working a scalpel into the corner near the cords and then slid a sheet of thin metal like you mentioned slightly farther down and it came apart relatively easily. From the bottom end where the output is, I worked across and the whole thing eventually opened like a book. problem solved!

댓글 달기

귀하의 답변을 추가하세요

chogokinaholic 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 13

전체 시간: 1,764