주요 콘텐츠로 건너뛰기

A 1.9 GHz DECT 6.0 multiple channel handset capable cordless phone, VTech CS6719-2.

7 질문 전체 보기

Power to base dies after 3-4 seconds after power is applied

Phone says "No Power to Base".. I unplug power connector from the base wait a second and replug in..The red LED turns on, within 2 seconds gets a little brighter for 1 second then totally dead.. I have checked power supply (5v) with a 5v source and same result..Cable isn't the problem because it's not intermittent. Same results consistently. the excess light before it goes dead , I'm thinking is a capacitor discharge, possibly through a hot shorted transistor.. Any thoughts out there?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

1개의 답변

선택된 해법

Hi,

Is the battery icon in the phone showing that the battery is fully charged?

The charging light will extinguish when the battery is fully charged.

Does the phone work at the charging location?

The No Pwr at Base message can also indicate that the phone is out of range.

해당 답변은 도움이 되었습니까?

점수 2
의견 추가하세요

귀하의 답변을 추가하십시오

Jay Trix 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 6

지난 30일: 9

전체 시간: 304