평판: 13
1
I have ordered two screens, both separate orders from iFixit for screen replacements for the 2012 Apple Macbook Pro 13"... each time, I replace the screen and I receive the "No Wifi Hardware Installed" icon. When I put the broken screen back on, the wifi works normally.
I have reinstalled the operating systems with no luck...
Any suggestions?
좋은 질문 입니까?
평판: 479.4k
35
329
971
Agreed, makes no sense! The Clutch cover in this series only has the WiFi & Bluetooth antennas. Are you sure you have this model? As an example, this model has the AirPort board is in the clutch cover: MacBook Pro 13" Unibody Mid 2009 AirPort Card Replacement
해당 답변은 도움이 되었습니까?
평판: 583
4
3
2
This is weird. Are you sure you properly plugged the airport/bluetooth daughter board with the new screen?
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 146
댓글 2개
Hi, did you ever find a fix? I'm having the exact same issue.
Travis Whalley 의
Travis I'm thinking the OP either mis ID'd his system or in fact the ribbon cable was bad. If you review Step7 in this IFIXIT guide: MacBook Pro 13" Unibody Mid 2012 AirPort/Bluetooth Board Replacement and here's the needed part MacBook Pro 13" Unibody (Early 2011/Late 2011/Mid 2012) Airport/Bluetooth Cable - Apple P/N 922-9780
Dan 의