해결됨: Ipad Display dim on one side after Glass Replacement - iPad 4

Ipad Display dim on one side after Glass Replacement

I just completed a repair of my mom's iPad 4 - The display was cracked so I replaced the digitizer and plastic ring around the outside. Part of the black dust strip was ripped so I peeled some of of it off on the lcd screen itself. Once assembled the display is dimmer down almost half the screen exactly. Is this because the black fabric / foam dust strip is removed or what else might it be?

게시일: 2016년 7월 28일

옵션

Hey @jeremy, you'll probably have to replace the LCD connector or the board of the iPad. One of the backlight filters probably became shorted out after the replacement. Here's one tutorial you can follow for fixing the issue.

-Let me know how it goes

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 5개:

Thanks for the feedback - I'll look into this.

jeremy 의 2016년 7월 28일

Cool keep me updated.

iApple 의 2016년 7월 28일

Fixed - I disassembled the ipad again - disconnected the LCD cables - cleaned them and reseated them. That restored the backlight. Thanks for pointing me in the right direction. Glad it wasn't more serious as noted in the video.

jeremy 의 2016년 7월 29일

Awesome! I'm glad I could help :)

iApple 의 2016년 7월 29일

You would be surprised how dust inside the display connector can cause this sort of problem. I had to clean up the connector with a fine brush to get the dust out.

Ben 의 2019년 1월 27일

댓글 달기

iPad 4

Ipad Display dim on one side after Glass Replacement

답변 1개

귀하의 답변을 추가하세요