iApple

My MacBook Screen has a broken LCD and I don't want to spend over $400 for a Display Assembly. If anyone could find a...

I was sitting with my MacBook Pro on my lap, when I picked it up and put it to the side, the sides glitched out. I think...

My dad has this iPhone 5S that had been water damaged for a long time. I cleaned all the parts with 90% isopropyl alcohol....

My iPhone 6 turned blank out of nowhere and now all I see is a black lit up screen. When I plug it into iTunes, it shows...

After a jailbreak on redsnow, my iPhone was stuck on the Apple logo, I waited for more then a week but nothing!!! I don't...

i earsed a lot of my data but it still says that i can't update because my memory is full !!!!!!! what should i do!! help!!

Since I got the new iPad last week, I was wondering if it was possible to install the A5X chip in the 4S. If it was...

I was wondering how can I move all of the icons on the right side of my computer, I searched a lot but I could not find...

I want to change Siri's Voice but I can't find any settings for it. It would help me a lot if you advise me. THANKS!!

Yes! If the issue is only with the computer and not the hard drive then yes, you can use the hard drive on a different computer. However, if the hard drive is causing the computer to not function appropriately then replacing the hard drive on a different computer will not work because the hard drive is corrupt or consists of hardware issues. -Let me know if this helps.

Hey @narimand, it took me a lot of research but I was able to find the part you were looking for on eBay. The seller is trustworthy and provides a 30 day money back as the return policy. After purchasing, you can followthis guide here for replacement. -Let me know if this helps.

Hey @diente this video has a clever solution to your problem. Here is the video. -Let me know if this helps.

Hey, @pinkskull, I found this video showing how to replace the front panel digitizer of this device here. There is also a teardown for a similar device as this here. Judging by what I've researched, I believe that you have to work backwards, as shown in the video, to replace this part. -Let me know if this helps.

Hi kimjg97, if, by repair, you mean you replaced the screen, I'm afraid that the phone is no longer water proof. If it were repaired by Samsung, then you should be fine. As shown in the comment section of the display repair on the Samsung Galaxy S7, the author, Brian, confirmed that the water resistance feature is no longer present. -Let me know if this helps.

Hi ingrid, here's something you can try: - Hold down the power and the mute buttons for about 2 minutes until the lights flash. If it doesn't work the first time, you may have to do it a couple of times to get it working. This happened my friend before and the 5th time did the trick. -Let me know if this helps

Hi, the only fix would be to do a factory reset and the tutorial for that is here. -Let me know if this helps

Hi Carrie, one of the common fixes for the flashing lights is to replace the current batteries you have with AA LR6 Alkaline batteries. -Let me know if this helps.

Hey Jack, it's funny you mentioned this because recently I watched this video of a man creating an iPhone 6S from scratch In the middle of this video he tests the display of an iPhone with just a logic board and battery which can be seen being done in this part of the video. If you mean being able to use an iPhone without the back template of the iPhone and just the parts I believe that it's definitely possible. A way you can make this work is bydisassembling your iPhone and connecting the parts to function it. Just be careful to not loose the parts or screw in the wrong screws during your experiment. -Let me know if this helps

Hi Feeding Logic, here is what hp recommends you do after encountering this error: ''To fix this error, use the following steps: If you notice that the system fan spins and is blowing warm air from the computer, clean the exterior vents to remove dust buildup by blowing air through the vent openings. Do this while the computer is off. Dust can accumulate inside the vent opening and around internal cooling components, preventing the removal of heat. After dust has been removed, try turning on the computer to see if the error goes away. if not, continue to the next step. For more information on reducing heat inside your computer, see Reducing Heat Inside the PC. Perform a hard reset. Performing a hard reset can reset recorded thermal values in memory and enable you to use the computer again — even if only for a short time to access and save any important files before service. For information on performing a hard reset, see Use Hard Reset to Resolve Hardware and Software Issues. In some cases, updating the...