주요 콘텐츠로 건너뛰기

1.6, 1.8, 또는 2 GHz G5 프로세서

163 질문 전체 보기

Display power inverter pinout or voltage for each of 6 pins needed?

I have a broken LCD on my netbook. The LVDS cable correctly fits in the display for my iMac which was gutted when the logic board caps went bad.

I have tossed the logic board. I still have the display, the power supply and the inverter. I need to know the voltage that each pin on the inverter takes to power the back light on the iMac display directly from the power supply.

The following links may be helpful to someone who speaks French.

http://forum.macbidouille.com/index.php?...

[ http://users.skynet.be/fa835376/pas%20a%...]

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 3
의견 추가하세요

1개의 답변

선택된 해법

This is from an iMac G4 is this something that you are looking at?

The inverter has 8 pins in as described below.

Blue = 11.93v

Red = 11.93v

Blk = GND

Blu = GND

N/C

Yel = .2mv

Prpl = 3.262v

Orng= no voltage detected

해당 답변은 도움이 되었습니까?

점수 3

댓글:

Check this out and see if it will help you.http://dremmeljunkie.blogspot.com/2010_0...

Good luck

의 답변

Also if you have the part number here you can look up the specs

http://www.jkllamps.com/index.cfm?action...

의 답변

의견 추가하세요

귀하의 답변을 추가하십시오

Shane Nelson 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 16

전체 시간: 6,111