기기를 수리하세요 커뮤니티 상점

옵션

New Contol board, new problem!

Our Frigidaire electric dryer (model GLEQ2152EE1) started randomly beeping. Error code diagnosis said we needed a new control board. New board installed and the beeping stopped, however, now the numbers for timed drying are nowhere near what shows on the digital display. i.e., when when you turn the dial to 75 min., 30 shows up on the digital display. I reported it to the place where I bought the part and they sent me another control board. Installed it today and the same problem. Is it possible we got TWO defective control boards or is it something else now?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 2개

@hermine exactly which error code did you get?

의

E93 was the original error code

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

it probally means it might need a new lcd driver as well as i can tell.

your trusty tech source,

bacon

해당 답변은 도움이 되었습니까?

예 아니요
점수 -1

댓글 3개:

bacon, Thanks for the suggestion. Have ordered the part and will let you know if that solves the problem.

의

Actually, installing this part did not solve the problem. :(

의

then you may need to do some programming for the display output.

bacon

의

댓글 달기

옵션

The control is probably 180 degrees off. You will have to find a way to turn it with the knob out since it is keyed. I have had to do that before with my own dryer.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Holly McPheeters 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 122