해결됨: water damage, no sound, very slow, fan keep spinning in high speed - MacBook Air 13" Mid 2012

water damage, no sound, very slow, fan keep spinning in high speed

MacBook Air 13" Mid 2012

Spilled some water on it, then some keys stopped working, so I replaced the keyboard, the new keyboard works fine, however after the replacement; there is no sound at all (not even the boot up chime) , and it becomes very slow , even just moving the mouse lags; and the fan is always spinning at high speed;

The WIFI also malfunctioned after replacement for some time (no hardware installed), but somehow it is working again.

I tried to reset SMC, doesn't work, the LED on the magnet connector doesn't even light up.

which part might be wrong in such case? logic board or I/O board?

게시일: 2016년 10월 10일

옵션

Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion causing these issues.

If the board or I/O board have been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 4개:

John, very long time, no see ;-)

mayer 의 2016년 10월 11일

Thanks for your answer, however I don't have a ultrasonic cleaner, and from the visual inspect, the boards do not seem to be dirty

Jun Hu 의 2016년 10월 11일

Hi @mayer ! Good to see you and hope you're doing well!

rdklinc 의 2016년 10월 11일

Concerning the board, have you inspected the other side? If the liquid came through the keyboard, corrosion could easily be on the other side. Even then, it's not necessarily visible -- part of the benefit of an ultrasonic cleaner is that they clean UNDER the chips.

rdklinc 의 2016년 10월 11일

댓글 달기

MacBook Air 13" Mid 2012

water damage, no sound, very slow, fan keep spinning in high speed

답변 1개

귀하의 답변을 추가하세요