기기를 수리하세요 커뮤니티 상점

모델 A1286. 2011년 2월 출시 / 2.0, 2.2, 또는 2.3 GHz 쿼드-코어 Intel Core i7 프로세서

586 질문 전체 보기

옵션

Won't reboot and got error code 4SNS/1/C0000008: Ts0P--124

MacBook Pro 8 2 2011

I was working on my quickbooks when my screen went completely red.

I manually turned off my computer and turned it back on. The working line was red and never loaded.

I shut it down again and ran an error test. I got this error code: 4SNS/1/C0000008: Ts0P--124

So I manually shut down again and tried to start it in safe mode. It acted like it would reboot but then went to a white screen. My computer will not get past the login screen. What do I need to do?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

First you have a bad thermal sensor which is what the error is: TsOP = Palmrest Proximity sensor.

Often when I see this the system has gotten something spilled into the keyboard and/or trackpad which has corroded the connections. The sensor is part of the Trackpad assembly. Here is the IFIXIT guide: MacBook Pro 15" Unibody Early 2011 Trackpad Replacement.

You should also make a full inspection of the system for any other corrosion damage and also clean out any dust in the fan's and fins.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

I had this error. Put "defective"trackpad into a new machine. Error gone. Searched the web and people said the webcam cable could also be to blame. Disconnected webcam cable. All issues stopped.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

amydoodledoll 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 417