해결됨: Touch gets wird when the screen is connected to ground - iPhone 5

Touch gets wird when the screen is connected to ground

A waterdamaged iphone 5 came in. I removed the shields and cleaned the board with ultrasonic. I replaced the screen and the phone now turns on and works okay. Allthough the touch wasn't great. It shutters and the screen freeses sometimes. It seems to help by restarting the phone, but only for a while. One thing that also solves the problem, is by lifting the screen out of the frame so the screen dosent get contact to ground.

Is there somthing wrong with the screen (i don't have a spare to try out right now)

Or does it short out the board somehow.

게시일: 2017년 1월 7일

옵션

The screen assembly may also have been damaged by the water. Have you removed the small parts to see if everything is okay?

The other thing to look at is the flex. There is a small black piece of tape covering up some connections. Sometimes this tape is not on properly or may have been removed. Look to this picture, it would be next to to the bottom left of the rectangle.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 1개:

The whole screen assembly is brand new, with speaker, camera etc, plug and play. It worked perfectly on another device. I have checked the tape covering the connection. I think theres some short circuit in the motherboard.

Still thank you for your time

anthonriis 의 2017년 1월 9일

댓글 달기

iPhone 5

Touch gets wird when the screen is connected to ground

답변 1개

귀하의 답변을 추가하세요