Error 9, need to recover data.

Question

iPhone 5s

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Gigabit87898 @gigabit87898

평판: 16.1k

39

92

13

게시일: 2017년 1월 31일

옵션

Error 9, need to recover data.

My own 5s decided it was going to go into a boot-loop. I was playing Egg,Inc (it is the best game ever) and my battery died. i plugged it in and a half hour later i returned to a iPhone 5s at the apple logo, but them i found out it was a boot-loop. Before it would boot up if the front camera cable was unplugged, but that doesn't work anymore. I really need to recover data from it. When i update, it shows error 9. Same with restore. it will say extracting, preparing, waiting,preparing,waiting, then it will fail. How could i get it to power up one last time to backup my game? Ive already tried heating the nand, putting pressure on it, etc. and it still wont restore/boot up. ive tried to update/restore without lcd and it still does this. Please help!

UPDATE:

Now it does not turn on after heating the NAND. PP5V0 and VCC_MAIN are both there. This thing is probably screwed up beyond repair.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 3

댓글 달기

답변 1개

선택된 답변

Minho @refectio

평판: 221.4k

15

289

807

게시일: 2017년 2월 1일

옵션

I was going to say, sadly too late, that heating NAND's or any other IC is generally not a good idea.

When you heat an IC, the heated solder balls expand. When there is underfill involved, it holds down the IC rather than let it float up on the expanded solder balls. The expansion has nowhere to go and they can either short out amongst themselves or explode out from underneath the IC. If you see tiny solder balls around the NAND, then that is why.

Were you using a genuine Apple Lightning cord?

There could be problems with one of the power rails. (there are dozens of rails in an iPhone), specifically the NAND related one. It could be a defective NAND or just a bad connection, in which case you could remove the NAND, clean up the underfill, reball the IC and re-install.

해당 답변은 도움이 되었습니까?

예 아니요

점수 2

댓글 7개:

I tested the voltages and they are there. The phone actually was on; just in DFU mode. Now I just need it to work, I don't really care about my game anymore. I am restoring and will tell you if it works.

Gigabit87898 의 2017년 2월 1일

Also yes it is a genuine Apple cord, it use it for my iPad too.

Gigabit87898 의 2017년 2월 1일

If I Reball and reinstall the NAND, will my data be there?

Gigabit87898 의 2017년 2월 1일

It just gave error 4005, it's on the same page as 9 on the apple website. Guess everything is pointing to the NAND now...

Gigabit87898 의 2017년 2월 1일

After cleaning underneath the NAND and desoldering it, I need to solder it back on but ran out of flux... Figures. It looks very clean though, also figured out why the gyroscope/compass didn't work, U18 was missing and I think it was making everything else not working right.

Gigabit87898 의 2017년 2월 2일

댓글 2개 더보기

댓글 달기

I tested the voltages and they are there. The phone actually was on; just in DFU mode. Now I just need it to work, I don't really care about my game anymore. I am restoring and will tell you if it works. — Gigabit87898
Also yes it is a genuine Apple cord, it use it for my iPad too. — Gigabit87898
It just gave error 4005, it's on the same page as 9 on the apple website. Guess everything is pointing to the NAND now... — Gigabit87898
After cleaning underneath the NAND and desoldering it, I need to solder it back on but ran out of flux... Figures. It looks very clean though, also figured out why the gyroscope/compass didn't work, U18 was missing and I think it was making everything else not working right. — Gigabit87898

iPhone 5s

Error 9, need to recover data.

답변 1개

귀하의 답변을 추가하세요