TI 84 Calculator got wet from water. Won't turn on.
Changed batteries but won't turn on. What can I do?
좋은 질문 입니까?
점수
2
373546
답변 1개
선택된 답변
평판: 221.4k
15
289
807
Try these steps...
- Open your calculator and remove the logic board
- Inspect the logic board, especially around the connectors and look for corrosion.
- Inspect both sides of the board.
- Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
- Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
- Rinse in alcohol and repeat.
- Let it air dry for a day.
- Re-assemble and hope for the best.
해당 답변은 도움이 되었습니까?
점수
3
