해결됨: A problem in Total station device? - Focus 8 series Total station

A problem in Total station device?

Hello,

I am facing a problem with my total station recently. I can't start survey pro or any other software on the device,

An "over speed" message keeps occurring after opening any program on the device after that program starts with electronic bubble referees to zero readings as shown in the attachments

Please give a solution for this problem and I need a hardware maintenance guide to deal with hardware problems at all

Best Regards

게시일: 2017년 2월 17일

옵션

Hi,

Here is a link to what the probable cause of your problem is. I realize that it is for a different model but in essence it most probably will be the same for yours.

http://mytrimbleprotected.com/knowledge/....

As I cannot find a service manual online for your device, you may have to contact a dealer for advice on what you can do.

Here is a contact link.

http://www.spectraprecision.com/eng/deal...

Hopefully this is of some help.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 3개:

Thank you for your comment

m-radwan99 의 2017년 2월 18일

Thank you for your help , I wonder how can I get a manual to disassemble the total station because the dealer is so far and i can't reach to him