기기를 수리하세요 커뮤니티 상점

2012년 6월 출시 / Core i7 프로세서 Turbo Boost 포함 / 최대 1 GB DDR5 비디오 RAM

597 질문 전체 보기

옵션

No external display output - even after replacing logic board...

I'm stumped on this one. I had a machine which intermittently failed to send output to an external monitor. I tried different adaptors and monitors on it. Eventually it was just out entirely and wouldn't display a signal.

So I replaced the logic board. To my amazement, the problem persisted. I tried SMC and PRAM resets but there was no change. I ran an ASD and it didn't show any issues over multiple test loops.

When I connect an external display, the internal display blinks out and back, as it normally would when detecting an external monitor and sending a signal to it. But it never gets a signal. System Preferences - Displays doesn't show that a display is connected.

Oh wise iFixians, do you have any idea what this could be?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Has the macbook by any chance seen any liquid damage in the past ? Since you replaced the entire board, I can think of just two possibilities..a faulty logic board purchased, but the odds would be against this chance or a short somewhere in your machine's other components. I would try disconnecting the lcd connector from the logic board and boot without it, just connected to the external since you got one available.

If that works properly the problem would be isolated to your macbook monitor..check if the connector to the board is fine with at least a lens and good light to make sure of its condition. It could also be some lcd component is damaged creating problems all along the line.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

귀하의 답변을 추가하세요

Colin 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 58