주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1687/A1634. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1041 질문 전체 보기

Home button was working but not now

The home button was working fine but suddenly fingerprint stop working and home button too. So I have to use ASSISTIVE TOUCH.

Every single home button that I replace the finger is not working.

So how can I make the fingerprint working again?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

@albertoh ,alberto, Info. from the troubleshooting guide link below. As a security feature, your home button's embedded Touch ID fingerprint sensor is uniquely paired to your iPhone's logic board at the factory. If the original home button assembly is replaced, damaged, or disconnected, Touch ID features will cease to function. If your original home button is salvageable, clean the connector and retry it. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

iPhone 6s Plus Troubleshooting

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

So fingerprint won't work after replacing home button no more?

alberto houtmann, Sorry, no it will not, only the original button will, it was paired to the phone at the factory.

댓글 달기

귀하의 답변을 추가하세요

alberto houtmann 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 92